Decorative Lightning Rods (ESE) HD-ZZ-8 decorative lightning rod / lightning tower
Composition Editor Voice
Lightning rod by the flash catcher, grounding lead wire and grounding body 3 parts. Flash catcher is usually used 15 ~ 20mm in diameter, the length of 1 ~ 2m round steel or steel pipe, fixed in the pillar on the end by grounding lead wire and grounding body connection.
When the thundercloud to the ground discharge channel development to the proximity of the ground, due to lightning rod tip protruding ground and have a good ground, in the needle tip near the electric field strength increase, accumulate the opposite polarity of the charge, guide the discharge. In turn, to prevent buildings or instruments accumulate too much charge and suffer lightning strikes.
Decorative lightning rod is also called decorative lightning tower.
Suitable for installation on the top of landmark buildings, major office buildings. Beautiful and generous, novel and unique, durable and good decorative effect. It can increase the beauty of the appearance of the stationing point and enhance the overall image of the building.
Our company can produce different shapes, different heights and different weights of decorative lightning rods (towers) according to customer requirements or according to the appearance of the building design.
Principle
Lightning rod, also known as lightning rod, lightning rod, is a device used to protect buildings, tall trees, etc. from lightning strikes. When the thundercloud discharge close to the ground it makes the ground electric field distortion. At the top of the lightning rod, the formation of local electric field concentration space to influence the development direction of the lightning pilot discharge, guide lightning discharge to the lightning rod, and then through the grounding lead wire and grounding device to introduce lightning current into the earth, so that the protected object from lightning strikes.
Scope of application
Decorative lightning rod is also called decorative lightning tower.
Suitable for installation in landmark buildings, major office buildings top. Beautiful and generous, novel and unique, durable, good decorative effect. Can increase the appearance of the stationed without the beauty, enhance the overall image of the building.
Our company can according to customer requirements or according to the appearance of the building design, production of different shapes, different heights, different weight decorative lightning rod (tower)
|
item
|
value
|
|
Place of Origin
|
China
|
|
|
Guizhou
|
|
Brand Name
|
HAMMOND
|
|
Material
|
Stainless Steel
|
|
Type
|
Ese Lightning Rod
|
|
Function
|
Lighting Protection
|
|
Name
|
Ornamental Lightning rod
|
|
Application
|
Suitable
|
|
Use for
|
High-rise Building Lightning Protection
|
|
CERTIFICATE
|
ISO9001
|
Product Tags:
|
|
HAMMOND 2m Length Decorative Lightning Rods For High Rise Building Images
|
